LUMESH

Support

Help with Lumesh, the MeshCore companion app for families.

Contact us

Tell us your iPhone or iPad model, your radio and its firmware version (Control Room shows both once it's paired), and what happened.

No account

Lumesh has no account: no sign-up, no login and no password to reset. Everything it keeps is on your device and your radio, so there is nothing for us to look up or delete. To start over, delete the app; if you saved a repeater password, tap Forget on that repeater's card first.

Questions

What radio do I need?

A MeshCore companion radio: a small LoRa radio running MeshCore's companion firmware, with Bluetooth, such as a Heltec, RAK or SenseCAP device. Lumesh looks for the companion firmware's Bluetooth service, so a radio running repeater or room-server firmware won't appear in the list; once your companion radio is paired, you can check on your repeaters from Control Room. You also need other people, or repeaters, on the same mesh. Without a radio, Lumesh shows sample data so you can look around first.

My radio asks for a PIN

Some radios ask to pair with a PIN the first time. When the box appears, enter the radio's PIN. The PIN comes from your radio, not from Lumesh: look on the radio's screen if it has one, or in its MeshCore documentation. If pairing keeps failing, remove the radio under Settings → Bluetooth, restart the radio, and try again.

Why does Lumesh need Bluetooth?

Bluetooth is the only link between Lumesh and your radio. Lumesh asks for permission the first time it looks for a radio, during setup or when you tap PAIR A RADIO on Today. It looks only for MeshCore radios and connects only to the one you choose. The link stays open in the background so messages and check-ins keep arriving. If you said no, turn it on again in Settings → Privacy & Security → Bluetooth → Lumesh.

What does Autopilot do?

Autopilot looks after the repeaters you mark as yours in Control Room. While Lumesh is connected to your radio, it checks each one on a schedule you choose, from every 15 minutes to every 3 hours (every hour to start with). It reads the repeater's clock and, if the repeater lets guests in, its status, and looks for four problems: a clock that has reset or drifted, repeating switched off, a battery below 3.5 V, and no answer twice in a row. When something needs you, it sends a notification.

If you've saved that repeater's admin password, Autopilot can also set a reset or slow clock from your radio, check that the fix held, and then have the repeater announce itself once, at most twice a day. It never changes radio settings. Every check and fix is listed in Control Room, where you can turn Autopilot, or either fix, off.

Does Lumesh use the internet?

Not unless you turn on CoreScope in Control Room; it's off by default. CoreScope is a public MeshCore map run by volunteers. With it on, your repeater cards show how many CoreScope observers heard them, and the map can place repeaters your radio has no location for. The CoreScope server sees your IP address and the public keys of the repeaters you mark as yours. The privacy policy has the details.

How do I block or report someone?

Touch and hold their message (on a Mac, Control-click it), then choose Block or Report message. Blocking hides their messages in your chats on this device, and their channel messages from then on; you can unblock them in Control Room. Report message opens an email to us with the message quoted, which you then send.

Why does Lumesh ask for the camera?

Only to scan a MeshCore invite QR code, when you tap Scan a code on iPhone or iPad. The image stays on your device and is never recorded or sent.